General

This innovative product is used for Data Exchange, SMS/Fax Messaging, SNP/GSM-CSD Bearer Serviced and has an embedded TCP/IP stack.  It comes in GSM, GPRS Versions and can be fixed either by Wall, Din Omega Rail mountings or be PCB integrated.  It has an RS232 port (I-Bas & C-Base) with 2 inputs and 2 outputs (I-OP).

Versions

• I-Base - GSM-GPRS-2 Band, GMS-GPRS-4 Band, GSM-GPRS-Edge
• I-BPlus - GSM-GPRS-2 Band, GMS-GPRS-4 Band, GSM-GPRS-Edge + SDK
• 1-IOP - GSM-GPRS-2 Band, GMS-GPRS-4 Band, GSM-GPRS-Edge + SDK
• C-Base - GSM-GPRS-2 Band, GMS-GPRS-4 Band
• C-BPlus GSM-GPRS-2 Band, GMS-GPRS-4 Band, +SDK

• SIM plug-in card reader, 3V type
• Status modem LED
• SMA F external antenna connector

• DB9 RS232 serial port connector
• MICROFIT 4 pin connector for power supply
• MICROFIT 6 pin connector for voice and Sync signal
• Wall, DIN and OMEGA rail fixing elements

• 18p screw connector (Data, Voice, I/Os, Supply)
• Wall, DIN and OMEGA rail fixing elements

• 50 pin M SMD 1,27 mm step signal connector
• 4 holes for on-board screw fixing

• TCP/IP stack  w/ dedicated AT commands set
• Modem status auto-check with modem functions auto-restore in case of failures
• Remote configuration of every modem parameter
• Remote control of RF field strength and of other radio parameters
• Remote Firmware download
• SDK : open Platform for custom applications development by C language

• EN 60950 (Health and Safety)
• EN 301 489-1/-7 (EMC)
• EN 301 511, EN 300 607-1 (Radio)
• ETSI 07.05, 07.07 AT commands control (proprietary for TCP/IP)

• GSM Voice and emergency calls (TCH/FS)
• SMS type MT/MO/CB/PDU
• GSAM data asynchronous non transparent 2.400 bps 4.800 bps and 9.600 bps
• CSD until 14.4 kbps / USSD / V.110 / Automatic fax 3 group (I, II class)
• RF Power: Class 4 (2W) for EGSM900, Class 1 (1W) for EGSM1800
• GPRS MULTISLOT class 10, GPRS MOBILESTATION class B
• GPRS max. 85.6 kbps (downlink) max. 42.8 kbps (uplink)
• PBCCH support, Coding schemes CS1, CS2, CS3, CS4