TC

If you can’t find the answer to your question either by using the search box or via the buttons, 

please call us on 01883 622778 or E-MAIL
FAQ(s) in All Categories page 2 of 3
To achieve line of sight, antenna height of 37 m is needed at the both ends (or e.g. 45 m at the oth ...
Modified On: 02/26/2010
 
Please double-check, that the battery pack functionality has been enabled from the radio modem
pr ...
Modified On: 02/26/2010
 
1. Connect the “-“ wire to analogue sensor and to negative (-) pin of “Analogue In” in I-Link100
...
Modified On: 02/26/2010
 
The C-LINK 100 responses to the falling edge of the pulse, so if input is switched to ON state for 1 ...
Modified On: 02/26/2010
 
No, this is not possible. Changing the channel spacing requires some hardware component changes (Rx ...
Modified On: 02/26/2010
 
Performance of your radio link depends dramatically on antenna arrangement. With antenna cables and ...
Modified On: 02/26/2010
 
When using a SATELLINE-1870 with terminal devices which actively control the DTR line (ie. PCs using ...
Modified On: 02/26/2010
 
Please, follow the checklist below for troubleshooting.
1. Radio modem software version is 3.15 o ...
Modified On: 02/26/2010
 
There are three different options for changing the operating frequency of the SATELLINE-3AS modem.
Modified On: 02/26/2010
 
Firstly make sure you have a programming lead!
Then you can either use any terminal program or em ...
Modified On: 02/26/2010
 

< Previous 1   [2]  3    Next >
All Categories (21)
 
Networking (2)
Designing and planning a network
 
Software (4)
Programming software
 
Antennas & Range (3)
 
Working with other Protocols (4)
 
Ordering (1)
 
Frequencies (2)
 
Troubleshooting (3)
What do check if it is not going to plan!
 
Certifications (0)
 
Compatibility (0)
 
Manuals (0)
 

This site uses Adobe .pdf files for more information go to www.adobe.com